意大利康茂盛閥島，CAMOZZI閥島說明書

意大利康茂盛閥島，CAMOZZI閥島說明書

  上海乾拓貿易有限公司                                  

　企業QQ：2880626087

　電話；021-69001039-8019

　手機；17321017802（微信）

　郵箱；17321017802@163.com

　地址：上海市嘉定區江橋嘉涌路99弄6號樓713室

 Supply voltage     Max number of operable coils

and 4, size 1 (12 mm) = tube ?4; ?6 Inlets 2 and 4, size 2 (14 mm) = tube ?4; ?6; ?8 Supply 1, size 1 

and 2 = tube ?8; ?10 Servo pilot 12/14, size 1 and 2 = tube ?6 Exhausts 3/5, size 1 and 2 = tube ?8;

Multipole integrated electrical connection (PNP) Valve functions: 2x2/2;

 separated exhaust 2QR3SLQR CARTRIDGES FOR SOLENOID VALVES AND ADDITIONAL PLATES *: Q = tube ? 4 R = tube ? 6                   

S = tube ? 8 (not for Size 1) L = free position (no cartridges) W = free position with bistable electric board (no cartridges)

 Z = free position with monostable electric board (no cartridges)

or through an integrated node in the island. The typical Series F single modularity allows 

the installation of up to 24 solenoids on 24 valve positions, even in the Fieldbus version.

The use of technopolymer in this Series has allowed to realize

 NC + 3/2 NO E = 2x2/2 NC F = 2x2/2 NO I = 2/2 NC + 2/2 NO V = 5/3 CC L = free position with passing electric board

 W = free position with bistable electric board Z = free position with monostable electric board X = supplementary supply and exhaust

 T = separated supply and exhaust U = separated supply, supplementary exhaust K = supplementary supply,

see the section about the Series CX multi-serial module (2.3.50)  

The servo-pilot supply air quality class must be 6.4.4 according to ISO 8573-1:2010 standard. Valve sizes 12 mm 

 14 mm Working pressure - 0,9 ÷ 10 bar Pilot pressure 3 ÷ 7 bar 4.5 ÷ 7 bar (with working pressure exceeding 6 bar

 for the versions 2x2/2 and 2x3/2) Flow rate 250 NI/min (12 mm) 500 NI/min 

(14 mm) Mounting position any position Duty cycle ED Protection class (according to EN 60529) IP40

  ELECTRICAL SECTION - MULTIPOLE VERSION Supply voltage   Max number of solenoids   

Max number of valve functions   Type of Sub-D connection   Max absorption

24 V DC +/- 10%   24   24 (monostable)   Sub-D 25 pin   0.8 A

  ELECTRICAL SECTION - FIELDBUS VERSION General characteristics   Max absorption   

 ? Manual override: Push or Push & Turn ? Available Protocols: PROFIBUS-DP,

 CANopen, DeviceNet, EtherNet/IP, PROFINET, EtherCAT

PNEUMATIC SECTION Valve construction spool with seals Valve functions 5/2 monostable and bistable  

digital outputs / analogic outputs and inputs 3 A digital/analogic inputs 3 A   

logic supply 24 V DC +/- 10% power supply 24 V DC +/- 10%   24 on 24 valve functions (monostable)

 TYPE: P = pneumatic A = accessories 2 SIZE: 1 = 12 mm 2 = 14 mm R MANUAL OVERRIDE:

 P = pressure actuation control  R = actuation control with push & turn device M 

 a valve island which is characterized by small dimensions,

 high flow and reduced weight. The reduced dimensions, its flexibility during the assembly 

as well as the wide range of valve functions make Series F a highly innovative product

 which is suitable for several application requirements. Usable silencers (Mod. 2939): see the section 2/9.05. 

? Valve size: 12 and 14 mm ? Modularity: single 

 2x3/2; 5/2; 5/3 CC It can interface with all major serial communication protocols.

5/3 CC 2x2/2 NO 2x2/2 NC 1x2/2 NC + 1x2/2 NO 2x3/2 NO 2x3/2 NC 1x3/2 NC + 1x3/2 NO Materials aluminium spool 

HNBR seals other seals in NBR brass cartridges technopolymer body and end covers Connections Inlets 2 

? Valve positions: from 2 to 24

 ?10 Exhausts 82/84, size 1 and 2 = tube ?6 Temperature 0 ÷ 50°C Air specifications Filtered compressed air,

 non lubricated, class 6.4.4 according to ISO 8573-1:2010 standard. If lubrication is necessary,

 please use only oils with maximum viscosity of 32 Cst and the version with external servo-pilot supply. 

The Multipole version of Series F valve island can be easily 

integrated with the accessories of the new Series CX multiserial module,

 thus connecting to the different serial nets provided

. It is also possible to manage a standard multipole island by means of a Sub-D adapter 

ELECTRICAL CONNECTION: M = multipole T CARTRIDGES FOR LEFT TERMINAL: S = tube ? 8 T = tube ? 10   

Note: the cartdriges for the right terminal are for tube ? 6. A SERVO-PILOT SUPPLY: A = internal 

B = external MB2CMUL2B SOLENOID VALVES AND ADDITIONAL PLATES *: M = 5/2 monostable 

D = 5/2 monostable with bistable electric board B = 5/2 bistable C = 2x3/2 NC A = 2x3/2 NO G = 3/2

意大利康茂盛閥島，CAMOZZI閥島說明書